How We Make 1-50pcs EV Aluminum Housings with CNC Prototype

2026-04-10 · 6 min read · X.d Prototype Engineering Team

For EV power-electronics teams, the gap between a validated CAD model and a physical housing is where programs stall. Large contract manufacturers are built for thousands of pieces, not the 1–50 pcs a validation build actually needs. That is exactly the gap we built X.d Prototype around. Here is how a typical aluminum housing project runs through our shop.

1. Drawing review and DFM

Every project starts with your STEP or IGES file plus a 2D drawing. Within 24 hours we return a quotation together with a free DFM analysis — flagging deep pockets that need special tooling, thin walls that risk chatter, and sealing faces where tolerance matters most. For housings, sealing faces and airtightness are the usual make-or-break items, so we review them first.

2. Material and process selection

Most EV housings we machine use aluminum 6061-T6, 6063 or AlSi12Fe cast plate. Each has trade-offs: 6061 machines predictably and anodizes well; cast AlSi12Fe behaves closer to final die-cast production parts, which matters when the prototype must represent later production behavior. We recommend the material that matches your test goal, not just the easiest one to machine.

3. Machining strategy for small batches

At 1–50 pcs, fixturing dominates cost. We design dedicated fixtures (often reusable across a program) so parts can run unattended through milling, drilling and tapping. Typical tolerance capability is ±0.02 mm on critical features. Internal cooling channels and complex cavities are machined before welding or sealing operations, never after.

4. Surface treatment

Depending on the test plan we add sandblasting, anodizing or brushing. For housings that must pass airtight tests, we mask sealing faces during anodizing so the joint surfaces stay within spec.

5. Inspection, airtight test and shipping

Before anything leaves the shop, parts get CMM inspection on critical dimensions and — for cooling parts — 100% leakage testing with a documented report. Packed and express-shipped, typical door-to-door time to the USA or Germany is a few days.

What it costs in time

From drawing approval to shipment, most 1–50 pcs aluminum housing projects complete in 7–15 days. If your program needs that timeline compressed for a milestone review, tell us — a phased shipment (first article + balance) is often the cheapest way to de-risk a deadline.

Send us your STEP file with quantity and target date — you will have a DFM-reviewed quotation within 24 hours.

Get a Quote for Your Part All Articles
Chat for a Free Quote